Multiply the Power, Divide the Rack: Introducing the Fonestar LUX SERIES at Epic Audio
Multiply the power. Divide the rack. We're pleased to introduce the Fonestar LUX SERIES, a new range of professional 4-channel Class D power amplifiers for fixed installations, now part of the Fonestar line-up at Epic Audio.
Leading the range is the LUX-4350, Fonestar's high-power-density model, delivering 4 x 350W RMS at 8 Ω, 4 x 700W RMS at 4 Ω or 2 x 1,400W RMS bridged, all from one compact 19″ chassis. It's joined by the LUX-4200 and LUX-4120.
The maths behind a fixed installation
Every watt you add to a sound project takes up space, wiring and time. More power has always meant more equipment, and a full rack means hours of wiring, configuration and maintenance. The LUX SERIES breaks that pattern: 4 channels, 3 power levels, 1 chassis.
Each amplifier has four independent, low-impedance Class D channels, designed for installations that need power, zone control, flexible configuration and reliable operation. Crucially, every power rating is specified with all four channels driven simultaneously, so the amplifier holds its performance when every zone is in use.

What installers get
- High power density: up to 4 x 700W RMS at 4 Ω from the LUX-4350, in a single 430 x 95 x 370 mm chassis weighing under 8 kg, where several amplifiers were once needed.
- Stereo, parallel or bridge: outputs optimised for 4 Ω or 8 Ω. Bridge two channels for a subwoofer or high-power speaker (up to 1,400W RMS at 8 Ω on the LUX-4350) and use the other two for background music, all from one unit.
- Built-in filters: LPF, HPF or full range on every channel, with a 40, 80 or 120 Hz cut-off and independent gain, so basic crossover filtering needs no external DSP.
- Easy integration: priority emergency input (line or 100V), mute by contact closure, XLR and removable Euroblock inputs and a ground-lift switch. Wire the Euroblocks outside the rack and the unit goes in pre-wired.
- Protected and efficient: level/power limiter; thermal, short-circuit, over-current, overload and DC protection; auto standby after 15 minutes without signal; variable-speed forced cooling.
Three models, one chassis
All three LUX amplifiers share the same features: filters, bridge mode, emergency input and protection. The only difference is the wattage, so you choose on power rather than features.
| Model | 8 Ω | 4 Ω | Bridged 8 Ω | RRP inc VAT |
|---|---|---|---|---|
| LUX-4350 | 4 x 350W RMS | 4 x 700W RMS | 2 x 1,400W RMS | £799.00 |
| LUX-4200 | 4 x 200W RMS | 4 x 400W RMS | 2 x 800W RMS | £699.00 |
| LUX-4120 | 4 x 120W RMS | 4 x 240W RMS | 2 x 480W RMS | £599.00 |
Fonestar figures, measured with all four channels operating simultaneously.
LUX-4350: high power density
For high-power systems with greater dynamic demands: auditoriums, large venues, demanding sports facilities and events, with high-power professional loudspeakers and subwoofers. 2,800W RMS at 4 Ω with all channels driven.
LUX-4200: the integrator's standard
The most versatile model, for medium-sized and multipurpose systems such as hotels, education, corporate spaces, sports centres and multi-zone projects.
LUX-4120: efficiency without oversizing
For background music, announcements and speech in small and medium spaces such as retail, offices, classrooms and hospitality, with every feature of the larger models.
Nothing left over. Nothing missing.
There isn't a single control too many or a connection too few: just what an installer needs to touch, right where they need to touch it. Every control and every connector is designed around installing, adjusting and maintaining a rack.
Please note: the emergency input is an integration and priority feature; the LUX SERIES is not an EN 54-16 certified voice alarm amplifier. For certified systems, see our EN 54-16 voice evacuation range.
Find out more
Explore the specifications, comparison table and installer FAQs on our Fonestar LUX SERIES page, or go straight to the LUX-4350, LUX-4200 or LUX-4120.
Not trading with us yet? Register for a trade account to see trade pricing and order online. Questions about a project? Call 01327 601211 or email sales@epicaudio.co.uk.
FIND OUT MORE: https://epicaudio.co.uk/pages/fonestar-lux-series
The LUX SERIES is designed and manufactured by Fonestar. Distributed in the UK by Epic Audio Ltd.