Fonestar MAX Series multi-zone amplifiers

Fonestar · Maximum Power Multi-Zone Amplifiers

MAX Series

· Multi-Zone · Class D · Bluetooth · All-in-one PA control for professional fixed installations

120W – 600W Up to 5 Zones Class D Bluetooth / USB / FM VOX Priority 100V / 70V / 4Ω Rack or Desktop
Shop MAX Series Compare Models
Great Power
120W to 600W RMS range
🎚
Multi-Zone
Up to 5 independent zones
📻
BT / USB / FM
Integrated background music
🎙
VOX Priority
Configurable priority levels
🔔
Call Tones
Built-in chime generator
🛡
Protections
Soft start, overload, temp
🧱
AMP IN / PRE OUT
Signal chain flexibility
📡
RJ45 Wall Panel
Remote wall panel input

MAX Series

Maximum power. Total zone control. Everything in one unit.

The MAX Series is Fonestar's most capable range of multi-zone PA amplifiers — built for professional fixed installations where power, flexibility and reliability cannot be compromised.

From a single 120W unit serving three zones, to a 480W powerhouse managing five independent areas, every MAX amplifier delivers Class D efficiency, an integrated media player, configurable VOX priority and attenuator control — all from a single rack-mount or desktop unit.

  • Up to 600W of Class D amplification — maximum efficiency, minimum heat
  • Up to 5 independent speaker zones with 7-position volume selector per zone
  • Integrated Bluetooth, USB and FM player for background music without additional sources
  • Configurable VOX priority inputs — mic paging automatically overrides background music
  • Built-in chime generator for attention tones before announcements
  • AMP IN / PRE OUT for signal chain integration with DSPs or processors
  • Remote wall panel input via RJ45 — pairs natively with WALLMIX Series
  • 100V / 70V line and 4Ω outputs — compatible with virtually any PA speaker
  • 24V / 3-wire attenuator priority for emergency override
  • Rack-mountable or desktop — simple, flexible installation

The problem with multi-zone audio

Why professional PA installations fail to deliver

The MAX Series was engineered to eliminate the three recurring pain points in multi-zone fixed installations.

Complexity

Too many boxes

Separate amplifiers, Bluetooth receivers, media players, zone controllers — each one is another cable run, another point of failure, another thing to configure.

Inflexibility

No local control

Staff can't adjust volume in their zone without going to the rack. Announcements interrupt the whole building. Different spaces end up at the same volume regardless of need.

Reliability

Recurring incidents

Overloaded circuits trip protection. Music plays over emergency announcements. Zones go silent after a power cut. Issues that keep coming back long after the installer has left.

The solution

The MAX Series was built with a single idea: all the power you need, all the control you want, in one unit.

Every MAX amplifier combines the functions of multiple boxes into a single, professionally engineered chassis — so you deliver cleaner installations, fewer callbacks and systems that work exactly as commissioned every time.

MAX-600Z rear panel — professional installer connections and settings

For the installer

Commission each zone independently. Set VOX sensitivity, attenuator priority and input levels once — and hand over a system that's locked, standardised and ready to use. Fewer site visits, fewer support calls.

MAX-600Z front panel — end user controls

For the end user

Each zone has its own 7-position volume control. Background music plays from Bluetooth, USB or FM. Announcements cut through automatically via VOX priority. Chimes signal attention before messages. It just works.

Available now at Epic Audio

Choose your MAX

Five models in stock for UK delivery. Same professional specification throughout — choose the power and zone count that matches your project.

MAX-120Z
Fonestar MAX-120Z
MAX-120Z
120W · 3 Zones · USB/FM Player
£599.95
Product Detail →
MAX-240Z
Fonestar MAX-240Z
MAX-240Z
240W · 4 Zones · Bluetooth/USB/FM
£699.95
Product Detail →
MAX-360Z
Fonestar MAX-360Z
MAX-360Z
360W · 5 Zones · Bluetooth/USB/FM
£839.95
Product Detail →
MAX-480Z
Fonestar MAX-480Z
MAX-480Z
480W · 5 Zones · Bluetooth/USB/FM
£899.95
Product Detail →
MAX-600Z
Fonestar MAX-600Z
MAX-600Z
600W · 5 Zones · Bluetooth/USB/FM
£1,198.95
Product Detail →

Full specification

Compare the MAX range

All models share the same Class D architecture and professional feature set. Differences are in power output and zone count.

Fonestar MAX Series — all five models stacked
Specification MAX-120Z MAX-240Z MAX-360Z MAX-480Z MAX-600Z
Amplifier Type Class D Class D Class D Class D Class D
Power (RMS) 120W 240W 360W 480W 600W
Speaker Zones 3 4 5 5 5
Zone Control 7-position volume selector + OFF per zone with LED indicator
Media Player USB / FM Bluetooth / USB / FM Bluetooth / USB / FM Bluetooth / USB / FM Bluetooth / USB / FM
Aux Inputs (RCA) 3 3 3 3 3
Chime (Call Tone) Yes Yes Yes Yes Yes
AMP IN / PRE OUT Yes Yes Yes Yes Yes
Input Priority Emergency Mute → CH1 Paging Mic → CH2–5 AUX/Player
VOX Priority Configurable sensitivity per input (7 levels)
Attenuator Priority 24V / 3-wire — emergency override to max volume
Wall Panel Input RJ45, 250mV RMS (WALLMIX compatible)
Outputs 100V / 70V line and 4Ω
Max Power per Zone 240W
Phantom Power 48V (all mic inputs)
REC OUT Yes Yes Yes Yes Yes
Protections Soft start · Overcurrent · Overload · Over-temperature · Short circuit
Power Supply SMPS (Switched-mode)
Fan Cooling Fanless
Installation Rack-mount or desktop
Rack Format 19" rack 2U 19" rack
UK Price (inc. VAT) £599.95 £699.95 £839.95 £899.95 £1,198.95

System integration

Pairs perfectly with the WALLMIX Series

The WALLMIX wall-mounted mixer connects directly to any MAX amplifier via a single RJ45 cable — carrying both audio and power. Local zone control for the end user, without touching the rack.

Together, MAX + WALLMIX deliver a complete, standardised room audio system: the installer sets levels and parameters once, the user sees only a clean wall panel.

Learn about WALLMIX →
WALLMIX connected to MAX Series amplifier

Use cases

The right amplifier for every professional installation

The MAX Series is trusted across the full range of commercial fixed installation environments.

Worship centers
Worship Centers
Optimal sound in the most difficult spaces
See more +
Hostelry
Hostelry
Bar or terrace? Both
See more +
Retail
Retail
The ideal environment for promoting sales
See more +
Sports facilities
Sports Facilities
Enough energy to train
See more +
Education
Education
Do not delay recess
See more +
Hotels
Hotels
Coordinate any event or congress
See more +
Transport stations
Transport Stations
Maximum control for changing space
See more +
Healthcare centres
Healthcare Centres
Ensure nothing goes wrong when you need it most
See more +
Offices
Offices
Flexible communication for your work
See more +
Factories
Factories
Setting sound systems in large noisy spaces
See more +
Institutional
Institutional
Optimal sound in the most difficult spaces
See more +
Tourist facilities
Tourist Facilities
A truly unique and unforgettable experience
See more +

"The MAX series, with class D amplifiers, offers precise control of attenuators and inputs in complex installations, as well as ringtones, microphone connection for zone management and input for remote panels. Everything a professional installation needs, without the complexity it doesn't."

Pablo Calvín
Pablo Calvín
Product Design Manager, Fonestar

Frequently asked questions

Do you have any questions?

What is the difference between the four MAX models?

The main differences are power output and zone count. The MAX-120Z delivers 120W across 3 zones with USB/FM player. The MAX-240Z, 360Z and 480Z step up to 4 or 5 zones with Bluetooth added to the media player. All share the same Class D design, VOX priority, chime, AMP IN/PRE OUT and 100V/70V/4Ω outputs.

Can the MAX amplifiers be used with the WALLMIX wall panel?

Yes — this is a native integration. The WALLMIX connects to any MAX amplifier via a single RJ45 cable that carries both audio signal and power. No additional cabling or power supply required for the wall panel.

What is VOX priority and how does it work?

VOX (Voice Operated Switch) priority automatically detects audio signal on a designated mic input and uses it to override lower-priority inputs — muting background music and playing the announcement instead. Sensitivity is configurable per input, so you can set the threshold to suit your space.

What is attenuator priority and when is it used?

In an emergency, the 24V / 3-wire attenuator priority overrides all zone volume settings and forces every attenuator to maximum volume — ensuring emergency announcements reach everyone in every area, regardless of how the local volume controls have been set.

Can the MAX Series drive 100V line speakers?

Yes. All MAX amplifiers output 100V and 70V line as well as a 4Ω low-impedance output, making them compatible with virtually all professional PA ceiling and wall speakers.

Can the MAX be rack-mounted?

Yes. All models are designed for both rack installation and desktop use. Rack ears are included.

What are the AMP IN and PRE OUT connections for?

AMP IN allows you to bypass the MAX's internal preamplifier and feed an external processed signal directly into the power amp stage. PRE OUT lets you take the preamplified signal out to an external processor, DSP or additional amplifier before it is amplified.

Is the MAX Series fanless?

Yes — all MAX models use passive cooling with no fan. This means silent operation, suitable for quiet environments such as offices, meeting rooms and classrooms, and fewer mechanical components to fail over time.

Ready to specify?

Get your MAX Series from Epic Audio

All five models in stock for UK delivery. Questions about your project? Get in touch and we'll help spec the right system.

MAX-120Z — £599.95 MAX-240Z — £699.95 MAX-360Z — £839.95 MAX-480Z — £899.95 MAX-600Z — £1,198.95